STEP 2 (See Diagram 2)
A.) Slide the Sliding Block (#10) onto the Main Seat Support (#6). Thread a M18 x
∅
3/8” Lock
Knob (#39) into the selected hole to hold the Sliding Block in position.
B.) Attach the Leg Developer Holder (#9) to the Front Stabilizer (#7). Secure it with three M10
x 5/8” Allen Bolts (#56) and
∅
¾” Washers (#62). Thread a M18 x
∅
½” Lock Knob (#69)
into the hole on the Leg Developer Holder.
C.) Attach the Main Seat Support (#6) to the Leg Developer Holder. Secure it with one M10 x 2
½” Carriage Bolt (#55) from the top, two M10 x 2 ¾” Carriage Bolts (#54) from the side,
three
∅
¾” Washers (#62) and three M10 Aircraft Nuts (#65).
D.) Attach the Main Seat Support to the Cross Brace (#5). Secure it with two M10 x 2 ¾”
Carriage Bolts (#54), one 4 ¾” Bracket (#37), two
∅
¾” Washers (#62), and two M10
Aircraft Nuts (#65).
7
