STEP 7 (See Diagram 7)
A.) Attach the Leg Press Base Frame (#38) to the bracket on the Leg Press Rear Base Frame (#31).
Secure it with two M10 x 2 ¾” Allen Bolts (#97), and two Ø ¾” Washers (#107). Securely tighten
the Nuts and Bolts previously installed in Step-6, Procedure C.
B.) Attach the Leg Press Post (#34) to the open bracket on the Leg Press Base Frame. Insert the 3
¼” Leg Press Axle (#84) through the pivot. Secure each end of the Axle with one M8 x ¾” Allen
Bolt (#90), Ø 5/8” Lock Washer (#124), and Ø 5/8” Large Washer (#43).
C.) Attach the Leg Press Backrest Support (#32) to the Leg Press Base Frame. Secure it with two
M10 x 3 ½” Allen Bolts (#100), four Ø ¾” Washers (#107), and two M10 Aircraft Nuts (#110).
18
Summary of Contents for IGS-6201
