background image

m. Do not “over train” Incorrect or excessive training may result in injury. 

n. Warning that any of the adjustment devices should not be left projecting. 

IMPORTANT : 

THE MAXIMUM RECOMMENDED WEIGHT CAPACITY FOR YOUR   
EQUIPMENT IS 

 KGS. 

Warning : 
             Before commencing with any exercise program, please consult your family 

Physician. If at any time during exercise you feel faint, dizzy or experience pain, 
stop and consult your family physician, the manufacturer may use same as a 
defense to any claim for injuries, damage or loss. The above warnings are in no 
way intended to limit or modify the consumer's remedies for breach of 
warranties pursuant to applicable 

Federal and State laws of regulations.

 They 

are being supplied strictly to ensure the safety of the individuals using this 
product. 

    The safety level of the equipment can be maintained only if it is examined 

regularly for damaged and wear.

           The appliances are not for children under 14 years of ages. 

Safe distance :
            Front and back : 100cm
            Left and right sides : 100cm

Important:
           Read all instructions carefully. Assemble the unit in accordance with the steps 

in the manual. Lay out all parts on the floor and check if you have all the parts 
included completely before beginning assembly. In case of a discrepancy, pls 
call the customer service department of the store for assistance. 
Replace defective components immediately and keep the equipment out of use 
until   repaired.

150

IA6800/impetus

2

o. Braking system:speed-independent.

Summary of Contents for 1A 6800 am

























Reviews: