SAFETY WARNINGS
This product is designed only for specific applications as defined in the instructions and should not be modified or used
for any manner not described in these instructions. Use only recommended accessories. Before using the EVOK 150
Vertical Wall Bed Kit:
READ, UNDERSTAND
and
FOLLOW ALL INSTRUCTIONS AND SAFETY WARNINGS. KEEP THESE
INSTRUCTIONS READILY AVAILABLE FOR FUTURE REFERENCE.
PRODUCT SPECIFIC WARNINGS
I. TO AVOID THE RISK OF SERIOUS INJURY, DO NOT ALLOW
CHILDREN TO PLAY ON THE BED UNIT OR OPERATE IT WITHOUT
ADULT SUPERVISION.
II. You
MUST
have another
ADULT
help you while installing your
EVOK 150 Vertical Wall Bed Kit to make sure the bed does not close
inadvertently while you are working. Failure to do so increases the
risk of serious injury.
III. You
MUST
install
ALL
1/4” x 3” Washer Head Lag Bolts into 2 x 4
or larger wooden wall studs. Failure to secure the unit into wooden
wall studs increases the chance that the bed cabinet will detach and
tip over, potentially resulting in serious injury.
IV. Cabinets for vertical Single and vertical Double beds
MUST
be
secured, using all required hardware, to at least two (2) wall studs;
cabinets for vertical Queen beds
MUST
be secured to at least three
(3) wall studs.
V. Wall Bracket (P) and lag bolt placement on images in these
instructions is for illustration purposes only. To avoid the risk of
serious injury, you must correctly place and securely attach Wall
Brackets and lag bolts to wooden studs in your wall.
VI. The bed will not stay down without the weight of the mattress.
Operating the bed mechanism without a mattress in place increases
the risk of sudden closing, entrapment and serious personal injury.
VII. Do
NO
T use wall anchors or drywall anchors.
VIII. Do
NOT
install against brick or masonry walls or
walls with metal studs.
IX. Do
NOT
user an impact driver to drive fasteners; the
added torque increases the risk of stripping the pilot
hole and weakening connections. Do
NOT
overtighten
screws.
X. Do
NOT
stand on the bed without an adult helper
holding it down to prevent it from lifting up.
XI. Do
NOT
deviate from the required interior cabinet
opening dimensions listed for the bed size you will be
building. An improperly sized bed cabinet could create
a safety hazard and result in serious personal injury.
XII. Do
NOT
modify the recommended design of
the bed cabinet to eliminate an Upper and/or Lower
Headboard. Such modifications could allow it to more
easily detach from the wall, causing serious injury.
XIII. Do
NOT
construct the cabinet from MDF,
particleboard or melamine coated MDF or
particleboard. The decreased screw-holding ability of
these materials increase the risk of cabinet joint failure
and serious personal injury.
XIV. Do
NOT
use a foam or very light mattress with this
product. See required weight specifications below.
Max. Mattress Size
Max. Mattress Thickness & Weight
39 x 75" (991 x 1905mm)
10" (254 mm) 66 lbs (30 kg)
54 x 75" (1372 x 1905mm)
10" (254 mm) 99 lbs (45 kg)
60 x 80" (1524 x 2032mm)
10" (254 mm) 132 lbs (60 kg)
Bed Size
SINGLE
DOUBLE
QUEEN
*Check in the back for Dynamic and Static load rating