10
ASSEMBLING THE FRAME
DO NOT FULLY TIGHTEN ALL THE FASTENERS UNTIL YOU HAVE FINISHED THE FINAL STEP (8)
4.1
1. Attach Upper/Lower Half Frame Supports (B) to one of the Left/Right
Side of the Frame (A), using the holes closest to the end of (A). Use 4 x M8
x 50mm bolts (BB) and 4 x M8 Locking Nuts (FF) for both Upper/Lower Half
Frame Supports to lock them into place.
2. Attach one of the Middle Frame Supports (C) to the Left/Right Side of
the Frame (A), using the middle holes. Lock into place with 2 x M8 x 50mm
bolts (BB) and 2 x M8 Locking Nuts (FF).
3. Repeat the first 2 steps for the other Left/Right Side of the Frame (A).
4. Attach the Flat Bars (F) and an Upper/Lower Frame Support (B) to
each end of the Long Center Frame Support (D). Use the middle holes to
connect each piece using 2 x M8 x 50mm bolts(BB) and 2 x M8 Locking
Nuts (FF).
5. Position the Long Center Frame Support (D) between the two side
frame assemblies, making sure that all tabs are at the bottom. Make sure
that the Flat Bars (F) bolted to the Upper/Lower Frame Supports (B) remain
on the outside of the Left/Right Sides of the Frame (A).
6. Bring the assemblies together, fitting the narrowed ends of the Upper/
Lower Frame Supports (B) into the open ends of the Left/Right Sides of
the Frame (A).
7. Attach the side assemblies to the Long Center Frame Support (D)
using the M8 x 50mm bolts (BB) and M8 Locking Nuts (FF).
8. Complete the frame by installing M8 x 50 mm bolts (BB) through the
Flat Bars (F) and the Left/Right Sides of the Frame (A) near the corners and
securing with M8 Locking Nuts (FF).
NOTICE
Make sure that the mounting plates of the Upper/Lower Half
Frame Supports (B) are pointing toward each other. Also make
sure that the tabs and corner braces on the Left/Right Side of the
Frame (A) are at the bottom.
NOTICE
Make sure that the metal tabs protruding from the Upper/Lower
Frame Supports (B) and the Long Center Frame Support (D) are
at the bottom.
