11
5
INSTALLING THE SLATS
O
1. Start at the head of the bed, nearest the pivot points on the
Left/Right Sides of the Frame (A).
2. Take two Slats (O) and place a Slat Cap (P) on one end of
each. Connect them by inserting the other ends into a Double
Slat Cap (Q).
3. Install the slats on the frame by inserting the pins on the
Slat Caps (P) and Double Slat Cap (Q) into the corresponding
mounting holes in the frame. You might need to bend the Slats
(O) slightly and use a rubber mallet to tap the Slat Caps and
Double Slat Cap into place.
4. Repeat to install all Slats, except in Rows 8 and 20 in Single
and Double and Rows 8, 11 and 20 in Queen beds. You will install
these Slats later.
P
P
Q
O
8
20
Pivot Point
11: Do
NOT
place this
row for Queen Size Beds.
