- 20 -
Noise when unit is cooling.
1.
Air movement sound. This is normal. If noise is too loud, set
to a lower FAN setting.
2.
Window vibration - poor installation. Refer to installation
instructions or check with installer.
Water dripping INSIDE when unit is
cooling.
1.
Improper installation. Tilt air conditioner slightly to the
outside to allow water drainage. Refer to installation
instruction or check with installer.
Water dripping OUTSIDE when unit is
cooling.
1.
Unit removing large quantity of moisture from humid room.
This is normal during excessively humid days.
Remote sensing (PMTS/Personal
Mapping Temperature Sensor)
deactivating prematurely.
1.
Remote control not located within range. Place remote
control within 20 feet and 180° radius of the front of the
unit.
2.
Remote control signal obstructed. Remove obstruction.
Room too cold.
1.
Temperature setting is too low. Increase the temperature
setting.
If you experience any issues that are not listed above, or if you are unable to resolve your issue after trying the
methods and solutions described above, please contact our technical support team:
Email:
Telephone: 1-866-954-4440
Or, visit our website :
http://www.impeccausa.com
Summary of Contents for IWA05KSP
Page 1: ......
