- 4 -
WARNINGS
Plug in power plug
properly.
Do not start or stop the unit by
inserting or pulling out the
power plug.
Do not use a damaged or
unspecified power cord.
Failure to do so may cause
electric shock or fire due to
excess heat generation.
Doing so may cause electric
shock or fire due to surges.
If the power cord is damaged, it
must be replaced by the
manufacturer or an authorized
service center or a similarly
qualified person in order to
avoid a hazard.
Do not modify power cord
length or share the outlet
with other appliances.
Never attempt to handle the
power cord or operate the unit
with wet hands or in a damp
environment.
Do not direct airflow directly at
room occupants.
Failure to do so may cause
electric shock or fire due to
excess heat generation.
Serious or deadly injury may
occur due to shock. Equipment
may be damaged due to short-
circuiting.
Continued exposure to direct
airflow can cause damage to
health.
Always ensure effective
grounding of the power
plug.
Do not allow water to run into
internal electric parts.
Always install circuit breaker
and a dedicated power circuit.
Incorrect grounding may
cause electric shock.
Doing so may cause failure of
the unit and/or electric shock.
Incorrect installation may cause
fire and/or electric shock.
Unplug the unit if you
notice strange sounds,
smells, or smoke coming
from it.
Do not use the socket if it is
loose or damaged.
Do not open the unit during
operation.
Doing so may cause fire
and/or electric shock.
Doing so may cause fire and/or
electric shock.
Doing so may cause electric
shock.
Keep firearms and or
explosives away from the
unit.
Do not use the power cord
close to heating appliances.
Do not use the power cord
near flammable gas or
combustible liquids such as
benzene, thinner, gasoline, etc.
Fire and/or explosion may
occur due to excessive heat.
Fire may occur due to
excessive heat.
Fire and/or explosion may
occur due to exposure to
excessive heat.
Ventilate room before operating air
conditioner if there is a gas leakage from
another appliance.
Do not disassemble or modify unit.
Failure to ventilate room may cause explosion
or fire.
Doing so may cause failure and/or electric shock.
Summary of Contents for IWA05KSP
Page 1: ......
