OPERATING INSTRUCTIONS
12
Do not exceed the maximum rated air pressure
for the accessory.
To disconnect a hose push the hose connector
towards the compressor and at the same time
pull back the brass collar, this will allow the hose
to be removed (See Fig 14).
Safety Valve
Check the operation of the safety valve, under
pressure, daily by pulling the ring as shown in
Fig 15. Air should be released you pull the ring
and stop when the ring is released.
• If the valve does not operate as described, or
if the valve is stuck, it must be replaced by
qualified service personnel before using the
compressor.
Warning!
Do not remove or attempt to adjust
the safety valve.
Reset Button
This compressor is equipped with a thermal
overload device, which operates as a safety
device to protect the motor.
When the motor overheats for any reason, the
overload cutout automatically cuts the power
thereby preventing damage to the motor.
Wait around 5 minutes for the motor to cool and
press the reset button (Fig 16).
Fig 12
Fig 13
Fig 14
Fig 15
Fig 16
