IMPACT SUBSEA
INNOVATIVE UNDERWATER PRODUCTS
www.impactsubsea.com
Document No:
0000.1991 |
Version No:
1.6 | 6
th
October 2020
15
4.1.1 Initial Connection
Shown above: Initial seaView launch screen
To begin, ensure the sonar is connected to the computer via RS232, RS485 or Ethernet
communications and is powered on.
Upon launch of seaView, the software will automatically scan the available communication
ports to detect the imaging sonar.
Once detected, the sonar will be displayed in the ‘Devices’ section in the centre of the
display. In the above example, the ISS360 sonar with serial number 1660.0015 has been
detected via an Ethernet connection and has an IP address of 192.168.1.200
Should a sonar be connected after running the software, the search button
should
be pressed to search for the newly connected sonar.
Note:
Ethernet communications:
If communicating via a network the ISS360 has DHCP enabled
by default, so it will automatically be allocated an IP address on the network.
If running directly into a PC - allocate the PC a static IP address to enable communication.
The default IP address of the ISS360 is 192.168.1.200. The PC should be configured to have
a compatible IP address (for example 192.168.1.100).
Left click once on the sonar then click on the ‘ISS360’ app at the left-hand side of the
screen. This will open the ISS360 sonar application and the sonar will automatically start to
scan.
