impact FRC-RLSLB, Instructions Manual

Page: 6 / 16

6
Operating Instructions
Loosen the ring light’s stand mounting knob and seat the
mounting receiver on top of the flexible stand mount.
Tighten the light stand mounting knob until secure. Adjust
the ring light into the desired angle.
Connecting to a power supply
Plug the power cord into a grounded 110/120 V AC power
supply only.
Adjusting the light angle
Loosen the angle tilt knob and position to the desired
angle. Retighten the angle tilt knob, but do not
overtighten.
Switching on the power/dimmer
With the ring light facing away from you, rotate the
power/dimmer knob counterclockwise until you hear a
click. The lamp will take a few seconds to turn on and will
be at full brightness. Within a few more seconds, it will
decrease brightness to the current dimmer setting.