background image

15

One-Year Limited Warranty

This IMPACT product is warranted to the original purchaser to be free from defects 

in materials and workmanship under normal consumer use for a period of one (1) 

year from the original purchase date or thirty (30) days after replacement, whichever 

occurs later. The warranty provider’s responsibility with respect to this limited 

warranty shall be limited solely to repair or replacement, at the provider’s discretion, 

of any product that fails during normal use of this product in its intended manner and 

in its intended environment. Inoperability of the product or part(s) shall be determined 

by the warranty provider. If the product has been discontinued, the warranty provider 

reserves the right to replace it with a model of equivalent quality and function.
This warranty does not cover damage or defect caused by misuse, neglect, accident, 

alteration, abuse, improper installation or maintenance. EXCEPT AS PROVIDED 

HEREIN, THE WARRANTY PROVIDER MAKES NEITHER ANY EXPRESS WARRANTIES 

NOR ANY IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO ANY IMPLIED 

WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. This 

warranty provides you with specific legal rights, and you may also have additional 

rights that vary from state to state. 
To obtain warranty coverage, contact the Impact Customer Service Department to 

obtain a return merchandise authorization (“RMA”) number, and return the defective 

product to Impact along with the RMA number and proof of purchase. Shipment of the 

defective product is at the purchaser’s own risk and expense.
For more information or to arrange service, visit www.impactstudiolighting.com or 

call Customer Service at 212-594-2353.

Product warranty provided by the Gradus Group.

www.gradusgroup.com

IMPACT is a registered trademark of the Gradus Group.  

© 2017 Gradus Group LLC. All Rights Reserved.

IMPACT 

®

Gradus Group Brand

Limited Warranty

Summary of Contents for FRC-RLSLB

















Reviews: