impact FRC-RLSLB, Instructions Manual, Page: 10 / 16

10
Operating Instructions
Attaching the cold shoe extension
Use this extension if more height is needed when
employing the ball head or the smartphone cradle. Loosen
the cold shoe foot at the base of the extension and slide
the extension into the cold shoe mount on the ring light.
Tighten the extension by turning clockwise until tight.
Screw the mini ball head and/or the smartphone cradle
onto the extension and tighten the locking wheel
until secure.
Attaching the mirror
Note:
for easiest mirror
attachment, lay the ring light on
a flat surface, or if it’s mounted
on a light stand, tilt it back so
that it isn’t standing upright.
With the mirror facing forward
toward your subject, align
the mirror’s mounting holes
with the screw holes on the ring light. Use the included
screwdriver and screws to attach the mirror. Remove the
plastic film from the mirror before use.