phone
:
877.467.2796 |
email:
PROPRIETARY AND CONFIDENTIAL.
COPYRIGHT © 2022 IMPACT WELLNESS BRANDS D/B/A IMPACT CRYOTHERAPY
6
CRYOSAUNA TROUBLESHOOTING GUIDE
If the door latch tension is too low, use a
flathead screwdriver and turn the
adjustment screws to the right to
increase the tension.
19
The Cryosauna
won’t start.
Check the power
supply.
Confirm the Cryosauna is plugged in.
If you are using a surge protector,
confirm it is ON.
Check the outlet for power.
Check the handle on the Electrical
Control Panel to make sure that it is in
the “ON” position. See picture below.
If all the above check out and the
Cryosauna still will not turn on, please
contact Impact Cryotherapy support.
20
The stairs are no longer sturdy, or the stair
rail is loose.
The stair placement is
important to maintain
safe entry and exit.
Check the placement of the stairs and
re-align them to the front of the unit.
If the stair rail has come loose, tighten it
with an Allen wrench or hex key.
21
Cryosauna
won’t run Session…Pre
-Cool
Required
The temperature in
the Cryosauna is
warmer than -40° C or
-40° F
No one is allowed inside the
Cryosauna during the Pre-
Cool Cycle.
A
Pre-Cool Cycle is required & entry is
prohibited.
Also note the “LOW
PRESSURE” message, see #16 of the
Troubleshooting Guide.
