9
WARNING !
This wiring requires a minimum speaker
impedance of 2 Ohm or more (both front system
and subwoofer)
Connections:
• Connect a stereo signal source to amplifier
inputs
• Connect the speakers as shown on the above
diagram. NOTE MINIMUM IMPEDANCES!!!
Settings
• Adjust the Input Level control to suit the
signal output from the source.
• Set the Crossover switch selector (
AMPLIFIER
X-OVER
) to the
FULL
position.
• You can adjust the bass response setting the
BASS EQ
control to an increase up to + 18
dB.
WARNING:
an increase of 3 dB means the double
of power: use the
BASS EQ
control with care and
moderation since you may cause damages to the
subwoofer (not covered by warranty).
