Connections:
• Power (
+ 12 V, GND, REM
) connections: refer
to the above diagram
• Input and speaker connections: as shown in
above diagram
WIRING SYSTEM Nr. 1
2 channel stereo configuration
Left Speaker
Right Speaker
to Remote Control
from Head Unit
FUSE
to Battery
to output
of Head Unit
Settings:
• Adjust the Input Level control to suit the sig-
nal output from the source.
• For Full Range Speaker System set the selec-
tor
AMPLIFIER X-OVER
to the
FULL
position
• For Low Pass Speaker System (i.e. HC used as
a subwoofer amplifier) set the selector
AM-
PLIFIER X-OVER
to the
LOW
position. Then
set the Low Pass Frequency control (
LOW
PASS
) to suit the speakers.
• For High Pass Speaker System (i.e. front sys-
tem, tweeter driving) set the selector
AMPLI-
FIER X-OVER
to the HI position. Then set the
High Pass Frequency control (
HIGH PASS
) to
suit the speakers.
• You can adjust the bass response setting the
BASS EQ
control to an increase up to + 18
dB.
WARNING:
an increase of 3 dB means the dou-
ble of power: use the
BASS EQ
control with care
and moderation since you may cause damages to
the subwoofer (not covered by warranty) .
