IMP Series User’s Manual
１０
4.2 Side Panel:
The side panel is located behind the plastic protection cover that can
be removed by pushing the clip. Depending on the system board and
your add-on cards, you may also have other ports such as Ethernet port,
and Audio ports. When in use, side panel can also be stored in a slot
located on the back cover
4.4 Power switch and plug:
The power receptacle is located on the right side of the machine near
the bottom. The three-prong power plug is supplied. Depending on
your Power supply type, you may find a main power switch located
next to the power receptacle and the position of the switch is of the
following: O=Off, I=On. This is the main power, to power up the system,
user still require to power on the machine at the front of the portable,
labeled Power. If your power supply does not have a main switch, user
will control power on/off using the power switch located in the front.
4.5 Power supply
（
PS/2
）
This kind of power supply is supported in IMP 600 /
670 series.
It’s also Active PFC Full-Range, 400W output.
4.55 Power supply
（
1U
）
:
This kind of power supply is supported only in
IMP 600 IMP 670
Summary of Contents for -600 Series
Page 34: ...IMP Series User s Manual...
