iMotion MC432 User Manual Download

Page: 70 / 81

iWaylink Inc.

iMotion MC

432

ser’s Manual

Touchscreen

Clean the touchscreen with alcohol wipes and immediately dry with a soft lens

cloth or lens tissues.

Camera

Wipe the camera window occasionally with lens tissues.

Connectors

Carefully clean the connectors using cotton swabs and isopropyl alcohol. Dry

the connectors with dry cotton swabs.

Troubleshooting

Common problems, their causes, and suggested solutions are covered in

the table below.

Problem

Cause

Solution

The

MC432/MC432L

does not turn on.

1. Battery depleted.

2. System crash.

1. Charge the battery.

2. Reset the device.

Battery does not

charge.

1. Device disconnected from

the charging cable.

2. Ambient temperature out

of range.

1. Reconnect the

charging cable.

2. Charge battery with

ambient temperature

between 0°C (32°F)

and 40°C (104°F).

No characters in

the display.

Device not on.

Press the power button.

Data not

transmitting over

Wi-Fi or

Bluetooth.

1. Wi-Fi or Bluetooth not on.

2. Out of range of access

point.

1. Turn on Wi-Fi or

Bluetooth.

2. Move closer to access

point.

No sound.

Volume off or set too low.

Adjust volume.

Display keeps

1. Inactivity.

1. Set Display Sleep to a

Summary of Contents for MC432


















































































Search results

Summary of Contents for MC432

Reviews:

Related manuals for MC432

Brands by name

Popular brands

iMotion MC432, User Manual

Search results

Summary of Contents for MC432

Reviews:

Related manuals for MC432

Brands by name

Popular brands