iMotion MC432 Page 69 User Manual Download

Page: 69 / 81

iWaylink Inc.

iMotion MC

432

ser’s Manual

Chapter 4: Basic Care

This chapter provides information on basic care and troubleshooting for the

MC432/MC432L.

Basic Care of the MC432/MC432L

The following basic care tips will ensure long, trouble-free use of the

MC432/MC432L.

Protect the MC432/MC432L from temperature extremes. Do not leave

the device in high temperature conditions such as near open heat

sources or in a closed vehicle on a hot day.

Do not store this device in harsh conditions, such as dusty or damp

locations.

Do not drop this device on hard surfaces.

The MC432/MC432L

’s touchscreen is glass. Do not scratch the screen.

Clean the MC432/MC432L housing with a soft dry lens cloth.

Clean the touchscreen with a soft cloth and diluted window-cleaning

solution.

Product Storage

When storing the MC432/MC432L make sure it is kept at a reasonable

temperature in a dry location. Make sure the battery is charged at least 50%.

Cleaning

Clean the MC432/MC432L as frequently as required depending on your

environment. Do not apply liquid directly, but wipe the device with a soft cloth

or pre-moistened wipes and then allow it to air dry before use. Clean the

camera window from time to time for optimum performance.

Housing

Wipe the housing including the buttons with a soft cloth or alcohol wipes.

Summary of Contents for MC432


















































































Search results

Summary of Contents for MC432

Reviews:

Related manuals for MC432

Brands by name

Popular brands

iMotion MC432, User Manual

Search results

Summary of Contents for MC432

Reviews:

Related manuals for MC432

Brands by name

Popular brands