Slew Drives
Dismantling
44
7.2
Dismantling
Prior to dismantling:
Switch off the system and safeguard it from being turned on
again.
Physically disconnect all energy supplies to the system,
discharge stored residual energy.
Remove fuels and auxiliary materials, as well as residual
processing materials and dispose of these items in an
environmentally responsible manner.
Then clean subassemblies and components properly and dismantle
them, taking applicable local occupational safety and
environmental protection guidelines into consideration.
1.
Unscrew the fastening elements of the toothed bearing ring.
2.
Remove the mounting structure.
3.
Unscrew the mounting elements of the housing.
4.
Remove the slew drive.
7.3
Disposal
IMPORTANT
Electrical scrap and electronic components, lubricants and
other auxiliary materials are subject to treatment as
special waste, and should only be disposed of by approved
specialist companies! Improper disposal may cause
environmental damage.
If a return or disposal agreement has not been concluded, then
recycle dismantled components:
Scrap metals.
Recycle plastic elements.
Sort and dispose of the remaining components in accordance
with material condition
Local municipal authorities or specialized disposal companies
provide information on environmentally responsible disposal.
