IMO *G3D-187, Instruction Manual

Page: 8 / 36

8
G. PARTS LIST
Table 5
LIST OF MATERIALS (FIGURES 18 THROUGH 22)
ITEM KIT DESCRIPTION
ITEM KIT PART DESCRIPTION
001 Case 024 Lockwasher (2)
002 XX Housing 025 X Mechanical Seal
003 Plug 026 Inlet Head or Clamp Ring
003 Capscrew or Bolt 027 Spacer
004 XX Tube 028 Nameplate
005 X O-ring (2) 029 Drive Screw *
006 X O-ring 030 Lockwasher
007 X O-ring 031 X Gasket
008 X O-ring or Gasket 031 Capscrew (4)
009 XX Inboard Cover 032 Plug
010 Capscrew or Bolt ** 035 XX Truarc Ring
011 XX Power Rotor 035 X Gasket
013 X Truarc Ring (2) 036 X Gasket
014 XX Spacer 039 Check Valve
015
X Ball Bearing
042 Tubing
016 Key 043 Spring Pin
017 Retainer 043 Spacer
018 Bolt (4) 044 X O-ring
019 XX Idler (2) 045 X Dyna Seal
020 XX Idler cups (2)
***
046 O-ring
021 XX Thrust Plate 046 X Stop Pin
022 Spacer (2) 047 XX Balance Piston Housing
023 Bolt or Stud (2)
(X) Minor Repair Kit items
(XX) Major Repair Kit items. Items marked (X) also included in Major Repair Kit.
Quantities are one (1) except when noted in parentheses after part description or noted
below.
* Quantity is three (3) for Figure 13 pumps.
** Based on Inboard Cover and Inlet Head design, quantity can be four (4), eight (8) or
Sixteen (16).
***
Note: Some Idlers have a hydrostatic thrust design and do not need idler cups (21).