Immergas VICTRIX PRO 35 2ErP, User Manual

Page: 17 / 52

17
1-24
Victrix Pro 35 - 55 2ErP
A
B
1.25 KITS AVAILABLE ON REQUEST.
• Cascade and zones heat adjuster kit.
• Support kit for fixing the heat adjuster to the
wall.
• Zone manager kit.
• Modulating room thermostat kit.
• External probe kit.
• System flow probe kit.
• DHW probe kit for external storage tank.
• Anti-freeze with -15 °C resistance kit.
• Individual boiler safety devices stub pipes kit.
• Boilers in cascade safety devices stub pipes kit.
• Three-way valve kit for coupling external stor-
age tank unit.
• Individual boiler hydraulic manifold kit.
1.24 CIRCULATION PUMP.
The boilers are supplied with a variable speed
circulator pump.
When the boiler is in the heating phase, pump
speed is defined by the setting of the parameters
“P27” and “P28”.
In domestic hot water mode the circulator pump
always runs at maximum speed.
Pump release. If, after a prolonged period of
inactivity, the circulation pump is blocked,
unscrew the front cap and turn the motor shaft
using a screwdriver. Take great care during this
operation to avoid damage to the motor.
• Hydraulic connection manifolds kit with two
boilers in cascade.
• Additional boiler in cascade hydraulic manifold
kit.
• Flue exhaust manifold kit with flue adjusting
devices with two boilers in cascade.
• Flue exhaust manifold kit with flue adjusting
device with additional boiler in cascade.
• Ø80/125 horizontal concentric kit.
• Ø80/125 vertical concentric kit.
• Ø 80 horizontal kit with flue exhaust.
• 80 Ø horizontal terminal kit with wall flue
exhaust.
• Ø80 vertical terminal kit.
•
The above-mentioned kits are supplied complete
with instructions for assembly and use.
Head available to the system.
Flow rate (l/h)
H
ea
d (kP
a)
Key:
A = Available head
B = Power absorbed by the circulator pump (dotted area)
Ci
rcu
la
to
r p
um
p a
bs
or
be
d p
ow
er (
W
)