Immergas INOX 200 ErP, Instruction And Recommendation Booklet

Page: 10 / 16

10
2-1
INS
TALLER
US
ER
MAINTEN
AN
CE TECHNI
CI
AN
2
INSTRUCTIONS FOR USE
AND MAINTENANCE.
2.1 CLEANING AND MAINTENANCE.
Attention: to preserve integrity of the storage
tank unit and keep the safety features, per-
formance and reliability, which distinguish it,
unchanged over time, you must at least execute
maintenance operations on a yearly basis in
compliance with what is stated in the relative
point at “annual check and maintenance of the
appliance”, in compliance with national, regional,
or local standards in force. Annual maintenance
is essential to validate the Immergas warranty.
We recommend stipulating a yearly cleaning
and maintenance contract with an authorised
local firm.
2.2 EMPTYING THE STORAGE TANK
UNIT.
To drain the storage tank, use the special
valve in the lower part of the storage tank
(Part. 5 Fig. 1-6).
Before draining, ensure that the DHW inlet
valve is closed.
2.5 CONTROL PANEL.
Key:
1 - Hole plug plaque
2 - Storage tank unit thermometer
2.3 CASE CLEANING.
Use damp cloths and neutral detergent to clean
the storage tank casing. Never use abrasive or
powder detergents.
2.4 DECOMMISSIONING.
In the event of permanent shutdown of the stor-
age tank, contact an authorised company for the
relative operations, among other things making
sure that water supply is disconnected.
At the end of its service life the appliance must
not be disposed of like normal household waste
nor abandoned in the environment, but must
be removed by a professionally authorised
company. Contact the manufacturer for disposal
instructions.