Immergas INOX 200 ErP, Instruction And Recommendation Booklet

Page: 7 / 16

7
1-4
1-3
225
226
227
228
229
224
221
222
223
223
INS
TALLER
US
ER
MAINTEN
AN
CE TECHNI
CI
AN
Solar control unit fixing.
Hole plug plaque removal. 1.6 SOLAR CONTROL UNIT
INSTALLATION.
(Optional for UB INOX 120-200 ErP
models only).
Using the solar control unit it is possible to couple
the UB INOX 120-200 ErP storage tank units to
a solar system.
Hole plug plaque removal (Fig. 1-3).
- Remove the casing as indicated in paragraph
3.3 of this book;
- Take the front casing (1) and remove the hole
plug plaque (2) unscrewing the 3 fixing screws
(3).
Solar control unit fixing (Fig. 1-4).
- Fix the screw (8) onto the support sheet steel
(9) paying attention to leave a couple of mm
between the head of the screw and the support
sheet steel;
- Remove the lid (6) from the solar control unit
(7) loosening the screw (5);
- Attach the upper part of the solar control unit
(7) to the screw (8);
- Block the solar control unit (7) in the lower
part using the screw (4);
- Make all electric connections as indicated in
the solar control unit instruction book;
- Re-mount the lid (6) from the solar control unit
(7) loosening the screw (5);
- Re-mount the storage tank unit casing.