7503641000000006
019
Incorporating
SCSQ10
02/22
Our policy is one of continued research and development. We therefore reserve the right to amend,
without notice, the specifi cations given in this document. © 2014 Norgren Ltd
DANGER!
Danger of injury caused by improper connection!
Danger of death through contact with live compo-
nents. When switched on, electrical components can
perform uncontrolled movements and result in serious
injury or death.
• Isolate the electrical supply before starting
work and make sure it cannot be switched
back on.
Personnel:
• Qualified electrician
Protective equipment:
• Safety goggles
• Protective gloves
1.
Make sure that connectors for the electrical
connection are available. If necessary, obtain
them from the manufacturer, see section 1.4
Manufacturer’s address.
2.
Connect the safety valves in accordance with
the specifications on the type plate.
3
. If using a two-hand control, ensure that the
actuating solenoids are actuated by an output
signal from an electrical two-hand control of
type III C per DIN EN 574.
6.2 Electrical connection
Improper
electrical connection
Electrical installation
Two-hand control
