7503641000000006
017
Incorporating
SCSQ10
02/22
Our policy is one of continued research and development. We therefore reserve the right to amend,
without notice, the specifi cations given in this document. © 2014 Norgren Ltd
Compressed air
Installing safety
equipment
Connections
WARNING!
Danger of injury caused by compressed air!
Compressed air can cause injuries if not handled
correctly.
• Make sure the machine is depressurised
before work begins.
• Have all work carried out by pneumatics
specialists.
Personnel:
• Pneumatics specialist
Protective equipment:
• Safety goggles
• Protective gloves
CAUTION!
Avoid damaging the thread when removing
the blanking covers.
1. Carefully remove the blanking covers from the safety
valve.
2. Fit any additional safety equipment such as failure indi-
cator units in accordance with the separate instructions.
3. Connect air supply equipment for drying, filtering and
lubricating air before pressure connection P.
For requirements for operating media and consumables,
see section 3.7.
Lubrication is not necessary if the connected
load is suitable for oil-free operation.
