BPGS10H PNEUMATIC GRIPPER SYSTEM
User Manual
BIM-BPGS10H-0719 Rev 1 | For Technical Assistance: 800-442-4622
5
GRIPPER UNLOCK
1. Release jaw by using a hex key or flat screwdriver and push on drive pin through slot in side plate.
JAW REMOVAL
1. Unlock gripper as shown above and remove pad(s) from existing jaws. Set a side for reassembly.
2. Top jaw should always be removed first. Remove SHCS and Schnorr washer from side plate. Rotate side plate up
to about 45° and remove side plate from gripper. Set SHCS and side plate aside for re-assembly.
4.
Remove SHCS and Schnorr washer from side plate. Rotate side plate up to about a 45° angle and remove
from gripper. Set SHCS and side plate aside for re-assembly.
3.
Remove jaw from gripper and flip gripper over to remove other jaw.
