Chisel jaw / shovel
Regular / flange jaw
Single blank
thickness
Movable jaw
pad color
Opposing fixed
jaw color
Moveable jaw
pad color
Opposing jaw
pad color
0.50mm to 2.0mm
Black (note 1)
Black
Black
Black
2.01mm to 3.5mm
Silver
Black
Silver
Silver
3.51mm to 5.0mm
Black (note 1)
Silver
Gold
Silver
5.01mm to 6.5mm
Silver
Silver
n/a
n/a
6.51mm to 8.0mm
Black (note 1)
Gold
n/a
n/a
8.01mm to 9.5mm
Silver
Gold
n/a
n/a
Note 1:
A shim is required under a black pad when it is installed on a chisel jaw gripper. This shim is included in all black replacement pad kits for the chisel jaw gripper.
Our policy is one of continued research and development. We therefore reserve the right to amend,
without notice, the specifications given in this document. © 2015 Norgren Automation Solutions, LLC.
11
10/15
P/N 00537UI REV: 004
Warning
Improper selection, misuse, age or malfunction of components used in
systems can cause failure in various modes. The system designer is warned
to consider the failure modes of all component parts and to provide adequate
safeguards to prevent personal injury or damage to equipment or property
in the event of such failure modes. System designers and end users are
cautioned to consult instruction sheets and specifications available from the
factory. The system designer/end user is responsible for verifying that all
requirements for the application are met.
Proposition 65:
These products may contain chemicals known to the state of
California to cause cancer, or birth defects, or other reproductive harm.
Warranty
The products described herein are warranted subject to seller’s Standard
Terms and Condition of Sale, available at seller’s website.
User Instruction for PGS10 Series Gripper
