15
English
6 Basic Troubleshooting
Error message
Machine Temperature is too HIGH
1. In most cases, no fog fluid is left in the tank.
When the hazer is operated with an empty
tank, the temperature inside the hazer will
get very high. In this case, refill the tank with
fog fluid. When the hazer has cooled down,
it will resume normal operation.
2. Failure of the electronic system may also cause
high temperatures. Please take the hazer to
your retailer and have it checked and repaired,
if required.
Error message
Temperature sensor error
1. The cause is usually a heating failure. In this
case, the hazer must be repaired by a skilled
technician.
2. If there is a malfunction while the hazer is
heating up, it may help to switch the hazer
off and to switch it on again.
3. Very high temperatures may also occur during
automatic cleaning.
7 Specifications
Heating power: . . . . . 680 W
Heat-up time: . . . . . . 4 – 5 minutes
Tank capacity: . . . . . . 2 litres
Control: . . . . . . . . . . via LC display with
touchpad or via DMX
DMX channels: . . . . . 2 channels
Power supply: . . . . . . 230 V/ 50 Hz
Power consumption: . 750 VA max.
Fuse: . . . . . . . . . . . . . F 5 A, 250 V
Dimensions: . . . . . . . 300 x 280 x 460 mm
Weight: . . . . . . . . . . 10.2kg
Subject to technical modification.
All rights reserved by MONACOR
®
INTERNATIONAL GmbH
& Co. KG. No part of this instruction manual may be
reproduced in any form or by any means for any com-
mercial use.
Summary of Contents for FM-600H
Page 2: ...2...
