6
ST.00
Adjust strobe effect from 0~20
F.000
Adjust electronic zoom
AUTO
AT
PR
From AT01 to AT10 with 10 different auto mode in zoom
From PR01 to PR10 with 10 different mode in zoom
SOUD
MOD1
Sound control with color change in zoom
MOD2
Sound control with color strobe in zoom
RUN
DMX
and
SLAV
mode for selection
DMX
Adjust DMX value from
001
to
512
PERS
STAG
Run stage mode ,12 channel with details on dmx protocol
ARC.1
Run 3 channel mode Red/Green/Blue
AR1.d
Run 4 channel mode Dimmer/Red/Green/Blue
AR1.S
Run 5 channel mode Dimmer/Red/Green/Blue/Strobe
HSV.
Adjust Color in
Hue
(0~255),
Saturation
(0~255)and
Value
(0~255)
ID
ID01
to
ID66
to set different fixture
TEMP
CURR
show current fixture temperature
EDIT
PR.01
to
PR.10
to set 10 programmer
SC.01
to
SC.30
to set 30 different sense
R.000
Adjust red color from 0~255
G.000 Adjust green color from 0~255
B.000 Adjust blue color from 0~255
ST.00 Adjust strobe effect from 0~20
T.000
Adjust
from 0~255
F.000
Adjust from 0~255
M.000
Adjust electronic zoom
SET
UPLD
sending data to next fixture with self-built in program
REST
reset fixture
ID
RGB
POW
DIM
OFF/ON
OFF/ON
HIGH/NORM select different power consumption with HIGH 100% and Norm 33%
OFF/DIM1/DIM2/DIM3/DIM4
CAL 1
White balance adjustment
WT01 to WT.11 to adjust R/G/B from 0~255
Ps: when run STAG mode, channel 5 can show 11 different white color
CAL 2
RGB
adjust correct color for RGB
RGB adjust from 25~255
STAT
R.000
Adjust red color from 0~255
G.000
Adjust green color from 0~255
B.000
Adjust blue color from 0~255
Master/slave mode
(auto-running
,
sound control)
This mode will allow you to link up 32 units together without a controller.
Use standard DMX cables to daisy chain your units together via the DMX connector on the rear of
the units.
For p
roper performance it may be necessary to use a terminator at the last fixture
.
