5 Operation
Switch on the controller with the POWER switch (5).
The control options are organized in a menu and can
be activated by means of the buttons MENU (1),
DOWN/UP (2) and ENTER (3). The following main
menu items are available:
1. SystemSet
basic adjustments
2. Auto Mode
automatic programme run
3. Sound Mode
sound-controlled change of
colour
4. dB Mode
sound pulse display
5. Hold Mode
permanent light
6. ReSet Mode
reset of units
7. Standby Mode
blackout
After switching on, the controller will shortly display the
version number before showing the last adjustment
selected. The operation is quite simple:
1) To return to the main menu, press the button MENU
until one of the menu items shown above will appear.
2) Select the desired menu item with the button
DOWN or UP and activate it with the button ENTER.
3) Activate a submenu item in the same way.
4) To return to the main menu, press the button MENU
(several times, if required).
5.1 Adjusting the number of tubes
To define, for example, the repetition rate of the run-
ning light effects, first adjust the number of RGBL-100T
tubes connected. For creating special effects, a differ-
ent number than the actual number of tubes can be
adjusted.
1) Press the button MENU (1) until the display (4)
shows “
1. SystemSet
”.
2) Press the button ENTER (3). The display will show
“
1.1 Tube Amount
”.
3) Press the button ENTER. “
Set:
” and the current
adjustment will be displayed.
4) With the buttons DOWN and UP (2), adjust the
number of tubes connected. Confirm with the button
ENTER.
5.2 Operation without DMX control
For controlling the RGBL-100T units, first activate the
desired mode (items 2 – 7) in the main menu and then,
if required for the mode selected, the corresponding
effect variant in the submenu. Further operating steps
can be found in the description of the submenus.
“2. Auto Mode” – automatic programme run
The following submenu items are available:
2.1 Auto Random
random order of effect variants
2.2 – 2.8
2.2 Auto Fade
colour transitions
2.3 SO Chase
change of colour as a running
light with a
s
ingle colour in
o
ne
direction
2.4 ST Chase
change of colour as a running
light with a
s
ingle colour in
t
wo
directions
2.5 MO Chase
m
ulti-coloured running light in
o
ne direction
2.6 MT Chase
m
ulti-coloured running light in
t
wo directions
2.7 MC Strobe
stroboscopic effect with chang-
ing colours (
m
ulti-
c
oloured)
2.8 WL Strobe
stroboscopic effect with
w
hite
l
ight
1)
For effect variants 2.3 and 2.5 only:
Define the running direction of the effect (
Left
,
Right
) with the buttons DOWN and UP and confirm
with ENTER.
2) Enter the execution speed “
Speed
”
of the effect with
the buttons DOWN and UP and confirm with
ENTER.
3) To change the speed or the direction, press the but-
ton ENTER; to select another function, press the
button MENU.
“3. Sound Mode” – sound-controlled change
of colour
3.1 Sound Random
random order of effect variants
3.2 – 3.8
3.2 TC Chase
t
wo-
c
oloured running light in
one direction, change of colour
depending on sound
3.3 SO Chase
change of colour as a running
light with a
s
ingle colour in
o
ne
direction
3.4 ST Chase
change of colour as a running
light with a
s
ingle colour in
t
wo
directions
3.5 MO Chase
m
ulti-coloured running light in
o
ne direction
3.6 MT Chase
m
ulti-coloured running light in
t
wo directions
3.7 Color Change
sound-dependent immediate
change of colour
3.8 Color Strobe
sound-dependent immediate
change of colour with strobo-
scopic effect
1)
For effect variants 3.2, 3.3 and 3.5 only:
Define the running direction of the effect (
Left
,
Right
) with the buttons DOWN and UP and confirm
with ENTER.
The other effect variants will already be activated when
the button ENTER is pressed; the display will show
“
OK!
”
.
2) To change the direction, press the button ENTER;
to select another function, press the button MENU.
9
GB
Summary of Contents for 38.3750
Page 3: ...3 1 2 3 4 5 6 7 8 9 ...
