IMG STAGELINE 38.3750, Instruction Manual

Page: 10 / 34

“4. dB Mode” – sound pulse display
The following submenu items are available:
4.1 dB Random
random order of effect variants
4.2 – 4.8
4.2 dB_Red
green running light against a
red background
4.3 dB_Green
white running light against a
green background
4.4 dB_Blue
white running light against a
blue background
4.5 dB_Black
blue running light against a
dark background
4.6 dB_RYG
bars in red | yellow | green
4.7 dB_Different bars with changing colours, dif-
ferent on several units
4.8 dB_Same
bars with changing colours,
identical on several units
1) Define the running direction of the effect (
Left
,
Right ) with the buttons DOWN and UP and confirm
with ENTER.
2) Enter the execution speed “
Speed ”
of the effect with
the buttons DOWN and UP and confirm with
ENTER.
3) To change the speed or the direction, press the but-
ton ENTER; to select another function, press the
button MENU.
“5. Hold Mode” – permanent light
The following submenu items are available:
5.1 White
5.2 Red
5.3 Green
5.4 Yellow
5.5 Blue
5.6 Purple
5.7 Cyan
5.8 White
1) The colour selected will be activated when the but-
ton ENTER is pressed; the display will show “
OK
!”.
2) To select another colour or function, press the but-
ton MENU.
“6. ReSet Mode” – reset of units
In case of malfunction, a reset of the units may elimi-
nate the defect:
When the menu item is activated, the display will
show “
ReSet? ”
. Accept (
YES
) or reject (
NO
) a reset of
the units with the buttons DOWN and UP. Confirm with
the button ENTER.
After resetting (indication: “ ReSetting, Please
Wait... ” ), the RGBL-100T units will show white light.
Any adjustments made concerning the number of
tubes and the DMX address will not be changed!
“7. Standby Mode” – switching off the light
(blackout)
For switching off the light of the tubes, press the button
ENTER; the display will show “
OK! ” .
5.3 Operation with DMX control
For operation via a light controller with DMX512 proto-
col (e. g. DMX-1440 or DMX-510USB from “img Stage
Line”), the unit is equipped with 4 control channels.
The functions of the channels and the DMX values can
be found in chapter 6.1. When a DMX control signal is
present at the jack DMX IN (7), the controller will rec-
ognize it; its display will show “
DMX Mode... ”
and the
DMX start address currently adjusted (
Addr: XXX
).
The start address is the address of the first DMX
channel; it will be defined for operating the unit with a
light controller. If e. g. address 17 on the light controller
is provided for selecting the operating mode, adjust the
start address 17 on the RGBL-100C.
The other functions of the unit will then automati-
cally be assigned to the following addresses (in this
example 18 – 20). As the next possible start address
for the following DMX-controlled unit, address 21 could
be used in this example.
To change the DMX start address:
1) Activate the menu item “
1. SystemSet ”
(select with
the button MENU and confirm with the button
ENTER).
2) Activate the submenu item “
1.2 DMX512 Addr ”
with
the buttons UP and ENTER.
3) Adjust the start address with the buttons DOWN
and UP and confirm with the button ENTER.
4) Press the button MENU, select item “
1.3 Enter
DMX? ”
with the button UP and confirm with the but-
ton ENTER.
The display will now show “
DMX Mode...”
and the new
start address.
If a function was manually controlled via the menu
of the RGBL-100C in the DMX mode, activate the
menu item “
1.3 Enter DMX? ”
once again to return to
the DMX mode.
10
GB