18
Order No. 38.0230
BEAM-4/RGBW
6. Settings
01)
While in the main menu, press the
UP
and
DOWN
buttons until the display shows
.
02)
Press the
UP
and
DOWN
buttons to toggle between the following options:
•
6.1 BL time
•
6.2 Adjust
•
6.3 Reset
•
6.4 Power
•
6.5 Error
•
6.6 Lamp
•
6.7 Use
•
6.8 Sensor
•
6.9 About
6.1 Settings – BL Time
01)
When the display shows
, press the
SETUP
button to enter the display blackout settings.
02)
Press the
UP
and
DOWN
buttons to choose one of the following options:
•
On (display continuously ON)
•
5s (display turns OFF after 5 seconds)
•
10s (display turns OFF after 10 seconds)
•
20s (display turns OFF after 20 seconds)
•
30s (display 30s turns OFF after 30 seconds)
6.2 Settings – Adjust
01)
When the display shows
, press the
SETUP
button to enter pan/tilt manual adjustment.
02)
When the display shows
, press the
SETUP
button to enter pan adjustment.
03)
Press the
UP
and
DOWN
buttons to adjust pan. Both, positive and negative values, are possible.
04)
When the display shows
, press the
SETUP
button to enter tilt adjustment.
05)
Press the
UP
and
DOWN
buttons to adjust tilt. Both, positive and negative values, are possible.
6.3 Settings – Reset
01)
When the display shows
, press the
SETUP
button to enter the menu.
02)
When the display shows
, press the
SETUP
button to run the reset or the
MODE
button to cancel
the reset.
6.4 Settings – Power
01)
When the display shows
, press the
SETUP
button to view the information about the output
power.
02)
Press the
UP
and
DOWN
buttons to view the information about the main or LED output power.
6.5 Settings – Error
01)
When the display shows
, press the
SETUP
button to enter the menu.
02)
The device will check for all possible software errors, while displaying current status:
.
03)
Press the
SETUP
button to complete the operation. If there were not any errors, the display will show
.
6.6 Settings – Lamp
01)
When the display shows
, press the
SETUP
button to view the light output information:
.
6.7 Settings – Use
01)
When the display shows
, press the
SETUP
button to check for how long the device has already
been used.
02)
When you press the
SETUP
button, the display will show
.
03)
Press the
SETUP
button to perform time reset or the
MODE
button to cancel time reset.
