5
Hazards in use
CAUTION:
Watch out for erroneous distance measurements if the instrument is defective or
if it has been dropped or has been misused or modified.
Precautions:
Carry out periodic test measurements. Particularly after the instrument has been
subject to abnormal use, and before, during and after important measurements.
Make sure the Bullseye 80 optics is kept clean and that there is no mechanical
damage to the bumpers.
CAUTION:
In using the instrument for distance measurements or for positioning moving
objects (e.g. cranes, building equipment, platforms, etc.) unforeseen events may
cause erroneous measurements
.
Precautions:
Only use this product as a measuring sensor, not as a control device. Your system
must be configured and operated in such a way, that in case of an erroneous
measurement, malfunction of the device or power failure due to installed safety
measures (e.g. safety limit switch), it is assured that no damage will occur.
WARNING:
Dispose of the product appropriately in accordance with the regulations in force in
your country. Always prevent access to the product by unauthorized personnel.
CAUTION:
Aiming the telescopic viewer directly at the sun or at the reflected laser beam
(reflected off metallic or mirroring surfaces, prisms……) is hazardous to the eyes.
Precautions:
Never aim the telescopic viewer directly at the sun or at highly reflecting surfaces
(metallic or mirroring surfaces, prisms……).
