11
Volume
Press this button until this symbol
appears on the display.
Press this button to take the first length measurement (e.g. length).
Press this button to take the second length measurement (e.g. width).
Press this button to take the third length measurement (e.g. height).
The result is shown in the summary row.
Indirect horizontal distance
Press this button until this symbol
appears on the display.
Press this button to measure tilt and distance. The summary line
displays the result as the horizontal distance.
The instrument should be held without a transverse tilt (max. 10°).
Staking out function
A distance can be set and then be used to mark off defined measured lengths.
Input staking out distances:
Press this button until this symbol appears on the display.
Distance flashes on the display.
By using
and
button, you can adjust the values to suit the desired
stacking out distance. Press
key to confirm it.
Press this key to take the stack out measurement.
The display shows required stake out distance in the summary line between the
stake out point and the instrument (refer to the reference).
If the instrument is then moved slowly along the stake out line the displayed
distance decreases. The instrument starts to beep at a distance of 0.1m from the
next stake out point.
