background image

11 

 

9.Waste disposal 

 

Discarding old devices   

 
At the end of its service life the discarded device has to be disposed in accordance with the 
national  regulations.  It  is  advisable  to  contact  a  company  which  is  specialized  in  waste 
disposal, or just contact the local disposal service in your community.   
 

WARNING! 

 

 
To exclude any abuse and the dangers involved make the waste device unfit for use before 
disposal.  For  that  purpose  disconnect  device  from  mains  supply  and  remove  mains 
connection cable from the device.   
 

CAUTION! 

 

 
For the disposal of the device please consider and act according to the national and local 
rules and regulations. 
 

10.Warranty 

iMettos warrants to the original purchaser of every new product, under normal and proper 
use  and  maintenance  service  as  specified  by  iMettos  and  upon  proper  installation  and 
start-

up  in  accordance  with  the  instruction  packet  supplied  with  each  unit.  iMettos’ 

obligation under this warranty is limited to a period of two (2) year from the date of original 
installation. 

 

WARRANTY CLAIMS 

 

All claims for parts must be made directly through iMettos. All claims should include: 
Personal Details:                                                              Products Details: 
Your name:                                                                        Model number: 
Your company:                                                                  Serial number of the product: 
Address:                                                                            Date of purchase: 
Email:                                                                                Proof of purchase : 
Phone: 
 
Pertinent information supporting the existence of the alleged defect.(Such as picture etc.) 
Please send the above information to [email protected] 
Our warranty departments will according to the actual situation and reply you   
within 24hours. 
 
 
 

Summary of Contents for HM-12














Reviews: