TRADUCTION OF THE ORIGINAL INSTRUCTIONS FOR USE
S315 SH eng ED.2011 rev.00
9/41
+
The machine is structured so as to offer lifting points, which are appropriately indicated and will have to be used
for lifting it.
+
In case the lifting belts touch parts of the machine, nylon belts are required; ropes or chains wrapped with jute or
clean covering can also be used. A great care is necessary while slinging and moving the machine in order to
hinder damages.
+
All operations have to be conducted with graduality, so as to avoid jolts and dangerous situations.
+
The person in charge of the operations has to make sure that all the national, local and company norms in
reference to injury prevention and work safety are respected.
+
Onr or more areas for material storage have to be identified.
After unpacking , unscrew the 4 screws of the fixing feet near the base of the machine unit.
Use the iron plate or the lifting rope already fixed to the highest part of the machine to lift it up.
The weight is shown on the packing outside and in the technical data of this manual book also -see par.2- ( it concerns
the total weight : only the floor stand weight is 100 kg. about).
Be sure that lifting tools are proper for the weight and that the moving is correctly made without unbalancing the
machine.
In case of following manipulations, the machine should be displaced with the saw frame completely down and fixing the
turntable to avoid rotations of the parts. Do not use the control box to lift the machine up. Desplace the machine from
floor stand in case of instability.
Transport with wooden crate or wooden case
.
( BY REQUEST , ON CHARGE )
The machine is wrapped with thermoplastic material in order to assure a suited protection of all its parts; then it is
packed into a wooden crate or cage to protect it from collisions, inclement weather and so on.
To lift it, use a forklift from front side of machine, with forks length 1.0 m or more .
You need to follow the indications you find on the packing before proceeding to moving or opening it.
WARNING
The size of the packing varies according to the machine ordered and its configuration.
WARNING
The machine is fixed to the packing by means of screws, so as to hinder that it can move during the transport
Summary of Contents for SIRIO 315
