TRADUCTION OF THE ORIGINAL USER INSTRUCTIONS
PERFECT 250-275-300eng ED.2010 rev.00
24/40
- 14 - BLADE ASSEMBLING
Choose the blade features by following the instructions of the previous list. Position the cutting unit up ( rest )
Turn back the movable protection guard ( inside the fixed protection guard ) to have the spindle .Follow as
recommended for each model by remembering that :
a) the closing spindle screw has the thread on left sense
b) the teeth of the blade must be oriented to the direction of the arrow placed on the protection guard .
c) before tightening the spindle screw, wheel back the blade to cancel the remaining shake between the driving pin and
the blade holes.
d) the models PERFECT 300 and PERFECT 275 has a clutch that is adjusted with the same screw of the
spindle ; it is necessary to clean the protective oil from the 4 tempered rings that settle the clutch before
mounting the blade.
e) rightly connect the bucket spring -pos.2- on the screw- pos.1 - as shown by the dr.RI0118.
NEVER mount the cup spring REVERSED , but always with the WIDEST part directed TOWARDS THE BLADE.
14.1 - MODEL PERFECT 300, see the dr. RI0130 :
Remove the screw -pos.9 and completely wheel the part-pos.10 - inside the protection guard-pos.11 -, by keeping the
little rod up -pos.12-. Through the central hole- pos.13- it is possible unscrew the screw of the spindle.
Remove it, also disconnect the 4 parts that settle the clutch and degrase them;
then with reference to the dr.RI0118 :
mount again the parts -pos.5 and 6-, insert the blade in the shown sense and agree the holes with those of the already
mounted flange. Couple the parts -pos.3 and 4- and connect them with the end of the spindle, by agreeing the driving
pins with the holes of the blade . Mount again the bucket spring-pos.2- and tight the screw-pos.1- to lock the blade.
Replace the start position of the protection guard and lock it.
14.2 - MODEL PERFECT 275 , see the dr. RI0155
Unscrew 1 turn ab. the screw -pos1- and turn completely the movable part -pos.2- into the fixed blade guard -pos.3.
Unscrew of 2 turns ab. The front screw -pos. 6- that fix the complete blade guard.
To reach the spindle it is necessary rotate to the back this cover blade, around the pivot pin -pos.5-.
Now it is possible unscrew the screw of the spindle.
Summary of Contents for Perfect 250
