TRADUCTION OF THE ORIGINAL INSTRUCTIONS FOR USE
GBS 218 / AutoCut ED.2010eng rev.00
13/35
11.2-
OPERATOR’S SAFETY
This section illustrates the safety protections applied on the saw, according to the current legislation in the field of safety.
11.2.1. ELECTRIC EQUIPMENT
– norm EN 60204-01
. Electric board closed with screws
– Main switch and sectionalizing CEE plug at the supply cable
. Marking of the electric components used, according to the indications on the electric scheme
. Control circuit with 24V tension
– Control transformer with fuses on input and output
. Earthing of all the electric parts with a dedicated GREEN/YELLOW wire, connected with a TN system to the supply
cable. A supplementary earthing point
– indicated with PE – can be located on the metallic structure of the machine
Summary of Contents for GBS 218
