TECHNICAL MANUAL
Page n°14 of 25
RF TRANSCEIVER MODULE 2.4GHz
B014
Doc. Revision°:0
Date: 11/01/2021
Technical Manual file.dot
revisione n° 0
data: 24/02/2020
IMET s.r.l.
Via Ronche, 93 33077 Sacile (PN)
–
ITALY
–
Tel. (+39) 04347878
–
Fax (+39) 0434 737848 P.IVA C.F. e Reg. Impr. PN:01106390931 R.E.A.
43483 CCIAA PN http//www.imet.eu e-mail:
5.0 Mounting Details
The B014 2.4GHz module is a screw mounting module and layout dimension are shown in figure 3.
The module B014 is 1,6mm (0,063
”) thick with castellated mounting point on the edge.
The module was assembled using standard lead free reflow profile for soldering connection. The
module is compatible with standard lead-free solder reflow profiles. To avoid damaging the module,
the following recommendations are given:
•
Refer to the solder paste data sheet for specific reflow profile recommendations;
•
Use no-clean flux solder paste;
•
Do not wash as moisture can be trapped under the shield;
•
Use only one flow. If the PCB requires multiple flows, apply the module on the last flow;
The B014 has 50
Ω
ultra miniature coaxial (U.FL) connector.
Caution: The U.FL connector is fragile and can oly tollerate very
limited number of insertions and disinsertions