E190601X rev.6_ENG
May 30, 2022
28
Below the delayed start indication appears the countdown that indicates how many hours and minutes are left
to the automatic and delayed start of the program.
The countdown can be interrupted at any time by pressing the "STOP" icon.
When the countdown expires, the cycle will start automatically.
24. RUNNING A PROGRAM
After selecting the program, as described in the previous paragraphs, the cycle is started by pressing the "START"
icon.
The selected program starts.
If the machine is equipped with a motorized closure, the start of the cycle is characterized by the locking of the
porthole, lasting a few tens of seconds.
During the execution on display the following screen appears:
The display information allows you to understand the operating conditions of the machine, during the execution
of the program.
All parameters can be changed during the race simply by tapping the corresponding icon. These changes remain
valid only for the current cycle: for updates on the function and for more information, please refer to the online
documentation.
ATTENTION!
In the case of early termination of the cycle remember that the temperature of the tissues may be high!
ATTENTION!
In case of breakdowns or malfunctions, immediately turn off the equipment and call the authorized technical
service center!
25. PAUSE OF A PROGRAM
While the program is in progress, you can pause it for a controlled pause.
To pause it, and then take a break, simply press the "PAUSE" icon.
The following screen appears on the display:
