imes-icore ione scan, User Manual, Page: 28 / 42

Page 28
5.4.3 Bite Alignment
In the event of a quadrant scan, you will be asked to scan only the side of the quadrant.
When doing full arch scans, you will be prompted to scan bilateral.
When selecting ‘bite’, allow a few seconds for the arch scans to load.
1.
Scanning the occlusion
1a. To capture the bite, you will begin scanning on
the central molars capturing both mandibular and
maxillary teeth in the first pass. Then scan only the
Maxillary molars and gingiva till the arch
1b. Once the arch is locked, the arch will get the
initial scan overlayed and a green checkmark will
ap- per like described below indicating you are
finished scanning that arch. Once the arch is
complete, repeat the process for the opposing arch.
1c. When the bite alignment is complete, you may
rotate the 3D image to confirm correct patient
occlusion.
2. Finalizing
When scanning is done we get the overview of the
case incl 3D preview of the scans. Additional notes
can be added and pictures or similar can be
attached to the case. If connected to a Lab via one
cloud the whole case can now be sent to the lab.
Additionally the scans and order form can be
exported to a different location on the PC.
3D Viewer
Each of the scans can be opened in the full screen 3D
viewer for closer investigation.