IMER IM R13 T, Use And Maintenance Manual

Page: 58 / 125

58
IM R13 T
OPTION
OPTION
15 S
!
STOP
OPTION
USE AND MAINTENANCE MANUAL
Platform control panel
Display unit
Joystick controls
Led
Switch
selectors
Led ON Led MICRO
The LED ON and LED MICRO indicate the functioning status and any potential alerts.
RED LED MICRO lit up: radio communication signal is lost (for radio versions).
Green LED MICRO off indicates that the HARE speed is active for the diesel/petrol engine.
Green LED MICRO flashing indicates that the TURTLE speed is active for the diesel/petrol
engine.
RED LED ON lit up
: platform control panel is active and transmitting via cable or via
radio.
RED LED ON flashing once every second, (for radio versions):
the battery is running
low. This indication is preceded by three beeps from the internal buzzer.
Switch the platform control panel on with the switch and wait until red LED ON is on .
Error code
The platform control panel performs a check on its own parts at each start-up and in the event of any
faults it shows an error code by causing the LED ON to flash and the internal buzzer to beep a number
of times, depending on the actual type of error found. Refer to the platform control panel manual attached
to the machine.