manualshive.com logo in svg

IMER IM R13 T, Use And Maintenance Manual, Page: 25 / 125

Share
Download
IMER IM R13 T Use And Maintenance Manual Download Page 25

25

IM R13 T 

USE AND MAINTENANCE MANUAL

Radio control and remote control

Radio control (optional)

The radio control is a digital remote control system, based on microprocessor technology,  protected 

against electromagnetic and radio interference.
The radio control consists of:

• 

a 

SERIAL CABLE

• 

two 

BATTERIES

 for platform panel

• 

a 

BATTERY CHARGER

• 

a 

UNIT RECEIVER

• 

a 

PORTABLE CONTROL UNIT (Platform PANEL)

 with joystick controls 

for proportional control of movements (switches and buttons for ON/

OFF functions, warning lights, graphic LCD). 

The platform panel and the receiver are combined so that a radio control operates only the machine for 

which it is intended.
Where you can’t use the radio control (for example in airports) you can connect to the platform panel:

• 

on the cage by the especially provided control cable;

• 

on the ground through the serial control cable connected to the central unit (the cable is contained 

within the document holder box).

Summary of Contents for IM R13 T






























































































































Reviews:

No comments