IMER U.S.A. Inc.
7
®
WHEELMAN
SAFETY NOTES
DO
Read all the instructions before operating the mixer.
DO
Use caution when assembling and transporting the mixer. Tie it down good in your vehicle.
DO
Keep the mixer clean and free of debris and mix build-up. After using, fill the drum with
water and run the WHEELMAN for 10 minutes or so, most of the cement will break
loose from the drum.
DO
Keep all the moving parts lightly lubricated, WD-40 may be sprayed all around the machine.
DO
Periodically inspect your mixer for abnormal wear or damage. If something does not
seem right call your dealer or IMER USA direct @ 800.275.5463.
DO
Wear the appropiate safety gear; hard hat, gloves, goggles, ear protection and wear
snug clothing around the mixer. Loose clothing can cause injury should it become
entangled with the mixer.
Do not start and stop the mixer with material in the drum, this will damage the motor and is
not the best way to mix.
Always have the drum rotating when filling or discharging the mixer, this produces the
highest quality concrete.
DO NOT
R
ASSEMBLY OF THE WHEELMAN WITH ELECTRIC MOTOR
- Follow drawings 1 thru 4 -
R
Slide the motor gearbox assembly #1onto the
motor gearbox frame #2 and anchor it in place
by using the 4 qty. 6mm locknuts provided #3.
2
1
Attach the motor gearbox frame #2,to the dump
handles #1 using the nuts,bolts,and washers
provided.Slide the wheels onto the axle and
keep them in place with the split pins provided.
4
5
2
3
1
