IMER U.S.A. Inc.
9
®
WHEELMAN
Drawing 8
Drawing 7
Lift handles here
MOVING THE WHEELMAN
®
WARNING
Always disconnect the power source
before rolling the mixer.
To roll the machine, grasp the two dump handles
#7 and gently lift upwards.
Lift gently,for if you lift the machine up too
quickly and too far, it will begin to
discharge the loaded material.
When moving the mixer around,whether loaded or
unloaded,clear a pathway so that the WHEELMAN
will be under control at all times.
Remember - the batch capacity of the
WHEELMAN is 225 lbs,do not attempt to roll it
fully loaded across uneven surfaces or down steep
slopes. This could lead to your losing control of the
machine and concrete going everywhere.
When in doubt, roll the machine empty to
where you want to pour the concrete,and
mix in that spot.
CAUTION -
Set Up Properly !
Clear a suitable work area around the mixer.Position
the WHEELMAN on level ground.
DO NOT EXCEED MORE THAN 5° of ground slope
or the mixer can fall over and cause bodily harm
and a big mess.
®
®
®
