background image

ONE YEAR WARRANTY

We warrant to the original purchaser that the IMER equipment described herein
(the "equipment") shall be free from defects in material and workmanship under
normal use and service for which it was intended for a period of one (1) year from
the date of purchase by the original purchaser.

Our obbligation under this warranty is expressely limited to replacing or repairing,
free of charge, F.O.B. our designated service facility, such part or parts of the
equipment as our inspection shall disclose to be defective. Parts such as engines,
motors, pumps, valves, electric motors, etc. furnished by us but not manifactured by
us will carry only the warranty of the manifacturer. Transportation charges or duties
shall be borne by the purchaser. This shall be the limit of our liability with respect to
the quality of the equipment.

This warranty shall not apply to any equipment, or parts thereof, which has been
damaged by reason of accident, negligence, unreasonable use, faulty repairs, or
which  has  not  been  mantained  and  operated  in  accordance  with  our  printed
instructions for our equipment. Further, this warranty is void if the equipment, or any
of its components, is altered or modified in any way.

THIS  WARRANTY  IS  EXPRESSLY  IN  LIEU  OF ALL  OTHER  WARRANTIES,
EXPRESSED  OR  IMPLIED,  INCLUDING  ANY  IMPLIED  WARRANTY  OF
MERCHANTABILITY OF FITNESS FOR A PARTICULAR PURPOSE.

We make no other warranty, representation or guarantee, nor is anyone authorized
to make one on our behalf. We shall not be liable for any consequential damage of
any kind, including loss or damage resulting, directly or indirectly, from the use or
loss of use of the machine. Without limiting the generality of the foregoing, this
exclusion from liability embraces the purchase's expenses for downtime, damages
for which the purchaser may be liable to other persons, damages to property, and
injury or death of any persons.

This warranty shall not be deemed to cover maintenance parts, including but not
limited to blades, belts, hoses, hydraulic oil or filters, for which we shall have no
responsability or liability whatsoever.

IMER U.S.A., Inc.

207 Lawrence Avenue

South San Fancisco, California 94080

(650) 872-2200

Summary of Contents for MASONRY 350 F 1188792











Reviews: