IMC MISTRAL 13 Series, Installation And Operating Manual

Page: 16 / 25

Mistral M60, M90, M135
16
ORDERING SPARE PARTS
In the event that spare parts or accessories need to be ordered, please always
quote the SERIES AND SERIAL NUMBER of the machine. This is to be found
inside the cabinet.
For installations outside the UK please contact your supplier.
For information on IMC spares and service support (if applicable), please call
IMC on +44 (0)1978 661155. Alternatively, contact us via email or fax:
IMC Service Desk Fax: +44 (0)1978 667766
E-mail: service@imco.co.uk
IMC Spares Desk
Fax: +44 (0)1978 667759
E-mail: spares@imco.co.uk
END OF LIFE DISPOSAL
At the end of its useful life the unit must be disposed of correctly and safely, to
meet the requirements of EU legislation regarding the recovery of ozone
depleting substances. The unit must be sent to a specialist recovery, recycling
and disposal site that is licensed for the disposal of refrigerated equipment.
Please note that the insulation in the Mistral range does not contain any ozone
depleting substances. The refrigerant used in the Mistral M60, M90 and M135
is R290a.
IMC can arrange removal of your redundant bottle coolers, transfer to safe
storage and disposal.
For more information contact IMC sales department.
Call +44 (0)1978 661155 Alternatively Email: sales@imco.co.uk
MATERIAL CONTENT
The Mistral units may contain a combination of the following materials;
Metals
Stainless Steel, Mild Steel (inc. Nickel Plated, Chrome
Plated & Zinc Plated), Aluminium and Copper
Plastics & Rubber PVC, Nylon, Polypropylene, Polycarbonate, Polyester,
Acetate, Neoprene Rubber and Silicone Rubber
Insulation Polystyrene, Polyurethane Foam
Oils & Gases Ester oil, Refrigerant R290a
Other Glass, Magnesium Oxide, electronic components.