The Manual of Ink-jet Printer
30
Eliminate Troubles
Ø
System troubles
：
No ink dot can spill out
The data wire of print head is loose
Power off, connect the data wire
once again
Electromagnetic-radiation
interference.
Far away from the source of
radiation and restart the machine
Print head system is damaged
Replace the print head system
Print
head
system
is
damaged
l
Scratch caused by something
inserting into print head gap.
l
Print head blocked caused by
using any others' non-approved
consumables.
l
Print head blocked caused by
Blended using the different
types of consumable.
l
The
irregular
maintenance
makes ink dryness.
l
The electric circuit is damaged
by connecting the data wire in
POWER ON status.
l
Break wire or loose wire
caused by pulling.
l
Printer is not grounded, and the
power supply is not good.
Replace the print head system
When
installed
with
encoder, the printing result
shows
non-uniform
in
length.
The encoder selection function is
not start up.
Please start up the encoder
selection function
Encoder wheel rolls uneven
Ensure the encoder wheel is
contact product completely.
Speed rate of printing is too small
The normal value of speed rate is
around in 8, the value is smaller,
the printed file is shorter.
Product moving speed is too fast.
Slow down the moving speed.
