The Manual of Ink-jet Printer
11
Switch on/off
Ø
Switch on
：
Checked up the power connection status before switch on. After switch on, it will enter into the operation
system within 15 seconds. Remove the print head cap and press PRINT key to start printing when using
oil-based inks.
When using solvent-base inks, please purged print head and drained out the dry-inks by blotting-paper.
After that, test the printing result by a blank paper.(more details see page24)
The procedure for using solvent-base inks: purge-squeeze-clean-test.
Ø
Switch off
：
Press the power button off and cover up the print head cap.
Note: Before switch off, ensured the print head under normal condition.
It is forbidden to purge the print head gap before or after switch off! Just need to seal it by print
head cap!
